Product Description
The feature of electric office desk is the adjustable height of the desktop.
According to the request of the user in the actual using, the office desk can be adjusted into different height.
It has the location memory to the prefer location which the user are used to. If the height is adjusted by other user,
You just need to press 1 memory button and then the height will be back to the original one.
It is very convenient and saves time for the user.
1. Input voltage: 110V/220V AC 50/60Hz;
2. Output voltage: 24V DC;
3. The stroke: 500mm ();
4. Max load capacity: 2000N;
5. No load speed: 23mm/s;
6. Type of duty: 10%.
| Model No.: | FYED-2-490-670-1000-H-W-2 |
| Input voltage | 100-240VAC |
| Output voltage | 24VDC |
| Load capacity | 1000N |
1. Button “UP1” and Button “DN1” are to control the lifting up and down of the office desk(self lock). Pressing button up1 and loose the finger, the office desk will lift up automatically. Pressing button DN1 at 1 time and loose the finger, the office desk will lift down automatically. It will stop when you press 1 of the button “UP1”, “UP2”, “DN1”, “DN2” in the process of automatically lifting up or down. (as pic 2)
2. Button “UP2”, “DN2” are to control the office desk up and down. Pressing button UP2, the desk will lift up and it will stop when you loose the finger. Pressing button DN2, the desk will lift down and will stop when you loose the finger. (as pic 2). (DN2 has the reset function too at the same time).
3. Reset button DN2 is used when the synchronous work of the office desk has the bigger accumulative tolerance and work abnormally. Pressing DN2 and not moving the finger, the desk will lift down all the time to the bottom. And then do not move your finger and keep pressing for 5 seconds, the office desk will have the rebound action which is up 5mm. It is a successful reset.
4. Memory button S need to work together with location key 1, 2, 3, 4. Firstly you need to set the memory location, for example when the desk lift up to 100mm location, you
Should press Key S and location button 1 at the same time. When the desk lift up to 200mm, press key S and button 2 at the same time. When the desk lift up to 300mm, press S and 3 at the same time. When the desk lift up to 400mm, press S and 4 at the same time. When we set well the location memory, we could use them. For example, when the desk is at any location, press button 1, the desk will be back to 100mm location. Press button 3, it is back to 300mm.
5. Digital display. When the desk lift up and down, the digital display will show the detail location and some code when the desk is in some special situation.
6. Used protection. When the desk work 3 minutes continuously, it will stop work automatically, and back to normal state after 999 seconds. Digital display will show “hot” code and count down 999 seconds.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Style: | Modern |
|---|---|
| Material: | Metal |
| Wood Style: | Panel |
| Condition: | New |
| Input Voltage: | 110V-220VAC |
| Output Voltage: | DC24V |
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
What are the key considerations when installing a motor base for optimal performance?
When installing a motor base for optimal performance, several key considerations should be taken into account. Here’s a detailed explanation:
1. Motor Base Selection: Choose a motor base that is compatible with the motor’s frame size and mounting requirements. Consider factors such as load capacity, structural integrity, vibration-dampening properties, and heat dissipation features. The base should provide a stable and secure platform for the motor.
2. Alignment: Ensure proper alignment between the motor and driven equipment. Misalignment can lead to increased friction, vibration, and premature wear. Use alignment tools and techniques to align the motor shaft and driven shaft accurately.
3. Leveling: Ensure the motor base is level to prevent unnecessary stress on the motor and its components. Use a spirit level or other leveling tools to adjust the base as needed.
4. Fastening: Securely fasten the motor base to the mounting surface using appropriate bolts, screws, or anchors. Follow the manufacturer’s recommendations for torque specifications to ensure proper tightening without overloading or damaging the base.
5. Vibration Isolation: Consider using vibration isolation pads or mounts between the motor base and the mounting surface to reduce vibrations and noise. These pads absorb and dampen vibrations, improving motor performance and reducing stress on the motor and surrounding equipment.
6. Clearance and Accessibility: Ensure adequate clearance around the motor base for maintenance and inspection activities. Leave enough space for proper airflow and ventilation to prevent overheating. Consider accessibility for routine maintenance tasks such as lubrication, belt adjustments, or motor inspections.
7. Environmental Factors: Consider the environmental conditions in which the motor will operate. Protect the motor base from moisture, dust, extreme temperatures, or corrosive substances that could affect its performance. Install appropriate protective enclosures or covers if necessary.
8. Documentation and Labeling: Keep detailed documentation of the motor base installation, including drawings, schematics, and torque specifications. Label the motor base with relevant information such as motor identification, installation date, and maintenance requirements.
9. Periodic Inspection and Maintenance: Regularly inspect the motor base for signs of wear, damage, or misalignment. Perform routine maintenance tasks such as lubrication, cleaning, and tightening of fasteners as recommended by the manufacturer.
10. Compliance with Regulations: Ensure compliance with local regulations, safety standards, and electrical codes when installing the motor base. Adhere to proper grounding and electrical connection practices to ensure safety and compliance.
By considering these key factors during motor base installation, you can optimize motor performance, reliability, and efficiency. A well-installed motor base provides a stable mounting platform, proper alignment, vibration reduction, and easy access for maintenance, contributing to the overall performance and longevity of the motor.
What role does corrosion resistance play in the selection of motor bases?
Corrosion resistance plays a crucial role in the selection of motor bases. Here’s a detailed explanation:
1. Protection of Motor Base: Motor bases are often exposed to various corrosive agents such as moisture, chemicals, saltwater, or industrial gases. Corrosion-resistant motor bases are designed to withstand these corrosive environments and prevent the deterioration of the base material. By selecting a corrosion-resistant motor base, you can ensure its durability and longevity, reducing the risk of premature failure or structural damage.
2. Preservation of Aesthetic and Functional Appearance: Corrosion can impact the aesthetic appearance of the motor base, causing discoloration, rust, or pitting. However, corrosion resistance helps maintain the visual appeal of the motor base over time. Additionally, corrosion can compromise the functionality of the motor base by weakening its structural integrity or hindering its adjustability features. By choosing a corrosion-resistant motor base, you can preserve both the aesthetic and functional aspects of the base.
3. Protection of Surrounding Equipment: Corrosion can extend beyond the motor base itself and affect other components or equipment in the vicinity. For example, if a corroded motor base transfers rust or contaminants to connected equipment, it can lead to operational issues or premature failure of those components. Opting for a corrosion-resistant motor base helps protect the surrounding equipment and ensures the smooth operation and reliability of the entire system.
4. Improved Maintenance Efficiency: Corrosion-resistant motor bases require less frequent maintenance and repair. They are less prone to degradation, which reduces the need for regular inspections, cleaning, and surface treatments. This not only saves time and effort but also minimizes maintenance costs associated with corrosion-related issues.
5. Environmental Compatibility: Industries or applications that involve exposure to corrosive environments, such as coastal areas, chemical plants, or wastewater treatment facilities, require motor bases that can withstand these conditions. Corrosion-resistant motor bases are designed to meet the specific environmental challenges and provide reliable performance in such demanding settings.
6. Long-Term Cost Savings: Although corrosion-resistant motor bases may have a higher initial cost compared to standard bases, they offer long-term cost savings. By investing in a high-quality corrosion-resistant motor base, you can mitigate the expenses associated with premature replacement, repairs, and downtime caused by corrosion-related issues.
When selecting a motor base, consider the environmental conditions, exposure to corrosive agents, and the expected service life of the motor base. Consult with manufacturers or suppliers to identify corrosion-resistant options that are compatible with the specific application requirements. They can provide guidance on suitable materials, coatings, or finishes that offer optimal corrosion resistance for your motor base.
Can motor bases be used for both horizontal and vertical motor installations?
Yes, motor bases can be used for both horizontal and vertical motor installations, depending on the design and configuration of the motor base. Here’s a detailed explanation:
Motor bases are versatile components that provide a stable mounting platform for electric motors in various orientations. The suitability of a motor base for horizontal or vertical motor installations depends on the specific design features of the base. Here are some considerations:
1. Adjustable Mounting Slots: Many motor bases feature adjustable mounting slots that allow for flexibility in positioning the motor. These slots enable technicians to mount the motor in either a horizontal or vertical orientation by adjusting the position of the mounting bolts. Adjustable mounting slots provide versatility and allow for easy adaptation to different installation requirements.
2. Rotatable Base Plates: Some motor bases are designed with rotatable base plates that can be repositioned to accommodate both horizontal and vertical installations. These bases often have multiple sets of mounting holes or slots on different sides of the base plate, allowing for easy reorientation of the motor. By rotating the base plate, the motor can be securely mounted in the desired orientation.
3. Specific Base Design: Certain motor bases are specifically designed for either horizontal or vertical installations. These bases have fixed mounting patterns or configurations that align with the intended motor orientation. For example, vertical motor bases may have a taller or elongated design to provide proper support and stability when the motor is installed vertically.
It’s important to note that not all motor bases are suitable for both horizontal and vertical installations. Some motor bases may be designed exclusively for either horizontal or vertical orientations due to their specific structural features or limitations. Therefore, it’s essential to consult the manufacturer’s guidelines and specifications to ensure that a particular motor base is appropriate for the desired installation orientation.
In summary, motor bases can be used for both horizontal and vertical motor installations, depending on the design and configuration of the base. Adjustable mounting slots, rotatable base plates, and specific base designs are some of the features that enable motor bases to accommodate different installation orientations. However, it’s crucial to verify the suitability of a motor base for a specific orientation by referring to the manufacturer’s guidelines.
editor by CX 2024-04-09
by
Tags:
Leave a Reply