Worm drive gearbox with motor
A robust worm-travel gearbox powered by an MM28 motor. Ideal applications where a simple to fit, high torque end result is required. Ideal for student based jobs which includes robots and buggies.
The unit has been designed so that the output shaft could be ‘clicked’ in and out for modification. Electronic.g. reducing to size. The motor is snap fitted into its cradle to activate the apparatus and worm.
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor is not turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for small walking robots, lifting mechanisms, and other applications where large torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draft to a few amps, making them perfect candidates for the DRV8833 motor driver carrier. Motor overheating can be caused by excessive stalling, even at suprisingly low voltages. We recommend that you utilize stall-detection sensors, or simply see your robot, to make sure that it doesn’t stall for lots of seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also suits on the smaller threaded end of the shaft, although it is not particularly designed to work with this type of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical right angle worm geared motors arranged new requirements for reliability, effectiveness and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly style offers easy integration at this point and a really future proof alternative. The Ever-Power gear motor offers total flexibility in mounting options includes shaft, base, encounter, and flange alternatives. The motor terminal box could be mounted in alternative positions rotated in 90º steps around the electric motor frame providing for unparalleled integration options.
Ever-Power gear motors adhere to North American and International requirements, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a genuine total option for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose proof,and can be used outdoors or in wet and dusty conditions without the utilization of additional enclosures. Full rated output is offered by the result shaft of the machine.
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connecting with Connect connectors.
With included inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the alternative for applications requiring a part turn, optional dual result, or an inability for the motor to be back again driven. The DC right angle gear motors are created for continuous and intermittent duty procedure. Our right angle gear reducers are designed with many mounting plate choices, making them perfect for a number of DC electric motor based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are designed to generate high torque in a small package size. Worm Gear Motors are excellent for applications that require a self- locking or breaking feature since the result shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various decrease ratios, precision cut gears, voltages and sizes, EP Products has a DC Worm Gear Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Equipment Reduction Ratios
Security Door Locks / Industrial Conveying Devices / Security Gates / Oral Chair / Ambulance Cots & Stretchers Many of our DC Motors could be complimented with among our Worm Gearheads. EP Items will continue to work with you to create and produce a Worm Gear Motor that may optimize the overall performance of your specific application.
Built to your unique requirements
Electric motor Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Slice / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
The turbo metal gear worm motor uses a metal gear box for toughness and a higher torque output. Because of the special mechanical structure of the worm drive the engine output shaft is definitely self locking and will not be rotated.
This part runs on the two wire connection and supports direction control in addition to PWM speed control. Ranked voltage is 12v and can achieve 40RPM, with a torque of 8kg/cm.
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially display their strength in applications where high gear ratios are essential. Our worm geared motors are consequently optimally suited for use in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Our worm geared motors have a higher overload capacity
Washdown versions enable simple and efficient cleaning of the drive system.
The NSD tupH sealed surface conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Our modular style give users maximum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each one of these has its unique requirements. The EP series worm gear motors can be quickly and efficiently adapted to meet your needs.
Worm gear models impress with their large power density and small style. If required, we can also source them with the impressive nsd tupH surface area treatment.
In addition to the basic EP housing, we offer an extensive line of bolt-on parts to customize the merchandise including torque arms, shaft addresses and output flanges. These can be easily field installed, but we will also be pleased to assemble the individual components for you.
Find out more about our modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm gear unit SMI
SMI worm gear models feature a simple, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes this product preferably suited for harsh and challenging industries like food processing and pharmaceuticals.
Adaptable input designs such as NEMA, IEC or immediate motor mounts in additional foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have on all sides several fixing possibilities and enable a simple assembling for the client.
Additional drive configurationscan be created by use of built-on add-ons (e.g. torque arm and result flanges). The housings are created in light weight structure out of aluminium die cast. Motor attachment is realised in general through IEC adapter B5 or B14A.
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Get Gearbox with Electric motor – incorporating the next features: 1 to 6V voltage rating, 17100 rpm no load velocity, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm large, 40mm high, a robust worm drive gearbox powered by an MM28 engine (included), most ideal for applications where an easy to fit, high torque end result is required, nylon housing and gear, requires light oil or silicon grease lubrication, perfect for student based projects including robots and buggies.
Most ideal for applications where a simple to fit, high torque result is required
Perfect for student based projects including robots and buggies
Reversible Large torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible Great torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
The engine is Gear DC motor with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared electric motor with self-lock, that is, regarding motor without electrical, the end result axis is fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole engine output shaft relatively-short than general gear engine, widely used to be installed the dimensions requirements strictly occasion.
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Application: open the windowpane, door, Mini winch. Ect.
In sumo robot or combat robot competition where excessive holding torque’s electric motor is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is definitely an improved option when compared to spur gear motor. Why is worm gear so unique? Check this wiki out: Worm Get.
“Unlike with ordinary equipment trains, the direction of transmission (insight shaft vs output shaft) isn’t reversible when using large reduction ratios, because of the increased friction involved between the worm and worm-wheel, when usually a single start (one spiral) worm can be used. This is normally a advantage when it’s desired to get rid of any likelihood of the output driving the input.”
In other words, it is hard to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Worm drive gearbox with motor