Small Precison Worm Decrease Gearboxes
There are many of specifications you will have to consider when making a worm gearbox selection.
First, what’s the input and output torque requirements? Next, examine vendor horsepower/torque charts and select the correct worm equipment reducer.
If the size of the gearbox is going to be an important consideration then check the reducer dimension specifications, not all manufacturers make compact units. In fact, working with the right supplier will help you not only find the right equipment reducer but also prevent some of the most typical mistakes in reducer selection. We offer a free guide to help you find the right supplier to utilize.
For low and fractional horsepower app you can expect two sizes of worm gear reducer, the SW-1 and the SW-5. Size and torque output are the major differences between both of these models. Both feature either a hollow or solid output shaft. Both models are compact and provide users an array of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your particular application or task is essential to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Little precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped mounting holes at the top and bottom
• Flush fitting bearing caps easy to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Correct Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is required. This right angle gear motor is indeed versatile it can work just about anyplace.
Features & Options
Double Shaft or Solitary Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power offers designed and built exclusive, high accuracy mini gearboxes that cannot be found anywhere else. Our miniature gearboxes can be found in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We are able to also provide custom micro gearboxes that are designed and created to meet your specific specifications.
Contact us for the mini gearbox the application requires, or demand a quote on a customized micro gearbox.
Micro Gearbox Options
Gearboxes are also known as reducers, gear reducers, acceleration reducers, equipment drives, and gearmotors. All conditions can be used pretty much interchangeably. Please note that the links for our small gear drives include info on the full selection of frame sizes for that series or style.
Bevel Box Micro Equipment Drive
Our bevel package miniature equipment drives are software rated for the maximum balance of performance and cost. Torque could be balanced to meet your RPM and operating life requirements. Light-weight with low backlash overall performance (less than 1°, with choice of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a compact package. They provide an result shaft at 90° from the input, and so are available in gear ratios from 1:1 to 40:1. Light-weight but long lasting, with machined aluminium housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: as low as ≤30 arc minutes
Rated for input boosts to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc moments of backlash or better. Also known as “shaft to bore gearboxes,” the unit provide a single insight shaft that protrudes from reverse sides of the casing; output can be a keyed bore. Regular one- and double-end shafts can be found and supplied with keys and retainer rings. An array of equipment ratios and insight sizes are offered to meet your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Obtainable in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and permanent lubrication. They offer two insight shafts on opposite sides of the frame, with two output shafts perpendicular to the insight shafts. Our mini 4 shaft worm equipment drives deliver high effectiveness efficiency with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Equipment Drive
These micro flange worm gearboxes produce an output at 90° from the insight. They deliver superior efficiency in an amazing array applications and are constructed with little footprints, making them perfect for operations where space is bound. They offer high efficiency with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: as low as ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and so are rated for boosts to 3,000 RPM. Aluminium housings and stainless gears and shafts make these inline spur gearboxes tough and corrosion resistant, for your many demanding applications.
Result torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm gear reducers deliver superior performance with high efficiency, and show rugged construction for challenging power transfer functions. Available in three gear ratios (5:1, 10:1, 20:1), our small worm gearboxes are designed in extremely small footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Small footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and produce a custom miniature gearbox to meet up your unique specifications. We can produce custom micro gearboxes in virtually any configuration your application requires, with result torque amounts as high as 900Nm. We can work from your gearbox designs, reverse engineer a preexisting unit, or help you develop an all-new design that delivers the performance you will need. Request a quote on a customized miniature gearbox or e mail us to discuss your unique requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest collection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and output shafts with drive crucial and retainer rings could be supplied to your specs for any of our hollow bore miniature gearboxes. We provide a fundamental selection of one ended or dual ended shafts to put together in these gearboxes. All gearbox shafts are given keys and retainer rings.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For E series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our application engineers to discuss your unique needs.
We offer a broad selection of misalignment shaft couplings in ” and metric bore sizes. Inch and metric precision floor shafts are available from stock.
Contact Us for High Performance Miniature Gearboxes
We will be the miniature gearbox specialists. All of our micro gear drive models deliver superior efficiency in a little footprint, and are durable enough for challenging function environments. E mail us to find out more about our mini gearboxes, or request a quote on a custom model that’s tailored to your preferences.
Additional benefits of worm drive gearboxes include: