Features
Industry-standard mounting dimensions
Thread-in mounting style
Best-in-class backlash
Four gear ratios offered (5:1, 10:1, 15:1, 25:1)
Mounting hardware is included for attaching to SureServo motors
Right-angle reducer utilizes a spiral bevel gear; motor could be located at a 90 deg. placement from the reducer, offering a more compact footprint
Helical-cut planetary gears for tranquil procedure and reduced vibration
Uncaged needle roller bearings for high rigidity and torque
Adapter bushing connection for basic and effective attachment to many servo motors
High-viscosity, anti-separation grease does not migrate from the gears; no leakage through the seal
Maintenance free: you don’t need to replace the grease for the life of the unit
At nominal speed, service life is 20,000 hours
Can be positioned in any orientation
5-year warranty
Applications
Gantries
Injection-molding machines
Pick-and-place automation
Linear slides
Packaging machines
Conveyors
Planetary Gear – THE PERFECT Servo Gear System
Planetary Gear Advantages:
High Torque Density
High Stiffness/ Low lost motion
High efficiency
Balanced System
Suitable for very high speeds
“Self-distributed” Lubrication
Servomotor with Gearbox:
Reduced load inertia
Boosted torque
Lower motor torque required
Smaller electric motor, lower current rating, less costly driver
A more compact and economical solution

Right Position Miter Gearbox Standard Features
Dimensions: right angle miter equipment drive is 3-21/32″ x 3-15/16″ x 1-1/4″ deep
40% glass filled polypropylene
Weight: 10 ounces
Shafts: Ground high-tensile steel. Any shaft can be utilized as a drive.
Gears: Hardened directly miter gears
Bearings: Hardened steel ball bearings, long lasting lubrication
Mounting: Three shaft installation positions provide versatility in application
Versatile: 3 shaft connections are provided for versatility in application
RAB-1 could be operated CW, CCW or Back again driven
RAB-1 is rated in 1/3 HP at 1800 RPM. Maximum speed is 3000 RPM
Benefits and Cost Savings
Longer service life
Less wear
Greater tooth-to-tooth contact
Quieter operation
The most effective power transfer design under rated load conditions
Custom Options
Stainless steel shaft (Please specify series stainless needed)
Longer shafts lengths upon input and output
2:1 Ratio
Right Position Drives Made out of Advanced Quality Construction
Ever-Power 2-Way Right Angle Gearboxes transmit power with peaceful, reliable spiral bevel gears. These superior bevel gearmotors feature hardened spiral bevel gears and nonmagnetic stainless-steel shafts. Our Two-Way 90° Gearboxes are also small and show multiple mounting options. The fully enclosed style guarantees the integrity of the internal gears.
Additionally, the cast aluminum housing of Ever-Power s premium quality Correct Angle 2-Way Gearboxes are designed for maximum strength and heat dissipation. The drives are available with shafts of 3/8”, 1/2″, 5/8” and 3/4″ diameter in both 1:1 and 2:1 ratios. We can quote several exclusive types of shafts aswell, including:
Squared
Splined
Extended
Shortened
Stepped
Two Way 90 Degree Gearbox Applications
Ever-Power Right Position Miter Gearboxes are used throughout dozens of industries in a huge selection of applications. Any make use of that demands the reliable transfer of speed or power, you could find a two-way gearbox bearing the Ever-Power brand. The compact design of Ever-Power Two-Way Right-Angle Gearboxes makes them well suited for applications such as for example:
Food Processing Equipment
Ovens & Dryers
Tumbling Barrels
Power Transmission Equipment
Register Controls
Stokers
Case Openers
Paper Rewinders
Test Equipment
Ever-Power Inc, offering the most reliable and reliable transfer of power on the market. Our company is known for its innovative styles and producing high-quality motion control solutions designed for engineered efficiency and durability. We provide a range of gearbox designs and a broad selection of versatile shaft couplings to provide you with a finish solutions for your mechanical and power tranny applications.
Right Angle Gearbox
Right angle gearboxes are seen as a the fact that the drive shaft and the result shaft are organized at an angle of 90 degrees. Based on the gearbox type, the axes can intersect in a plane or cross on two parallel planes, which results within an axis offset.
Right angle gearboxes are realized with different types of gear teeth or a combination of different gearing types. The most famous single-stage gearbox types are bevel and worm.
Because of the high solitary stage ratios and the reduced effectiveness level, worm gears can perform a self-locking impact. With worm gears it is also possible to get a hollow shaft as the drive shaft.
Bevel gearboxes come with various kinds of gearing. Bevel gearboxes with intersecting axes are realized using bevel gearing with directly, helical or spiral tooth. Hypoid gearboxes possess helical bevel gearing with which the axes cross with an axis offset. The bandwidth of technically practical ratios with that your bevel gear stage could be realized is larger with hypoid gearboxes than with the classical bevel gear teeth.
Bevel gearboxes can also be combined with additional gearbox types. A frequent program in this respect may be the combination with a planetary gearbox, whereby the planetary gearbox can be linked upstream or downstream. This results in a wide range of overall multiplication factors and wide variety of uses in many industrial applications.
The efficiency level of bevel gearboxes is normally lower than that of coaxial spur gearboxes, particularly compared to planetary gearboxes. That is because the bevel gear stage generates a high degree of axial power and radial pressure, which has to be absorbed by suitable bearings. This escalates the power loss, which is particularly significant in the drive stage of the gearbox.
The working noise and the transmittable torques of classic bevel gearboxes are also less than with single spur equipment teeth. Hypoid gearboxes, however, are incredibly noisy and may transmit huge amounts of torque, but a considerable amount of bearing load takes place in the bevel gear stage of the gearboxes.
In summarizing, a right angle gearbox is constantly used when the amount of installation space in the application form is limited, or an angular arrangement between your drive and the output is necessary by the application. Also, they are used in situations where in fact the input shaft must be hollow in order to business lead through lines or make use of clamping sets.
The benefits of right angle gearboxes:
Use when set up space is limited
Compact design
Can be combined with other types of gearbox
Quiet and high amount of torque when working with hypoid gearboxes
Edition with hollow shaft possible
The disadvantages of right angle gearboxes:
Complex design
Lower effectiveness level than planetary gearbox
Noisier
Lower torques in single-stage ratio range
The Ever-Power, the original right angle gearbox drive, is more popular and is used worldwide. The Ever-Power provides manual or power tranny of rotary movement in a COMPACT, standardized right angle device.
Our standard line of bevel gearboxes are available from share in both an ” and Metric Series, solitary or dual output shafts, 1:one or two 2:1 ratios, and grease lubricated for life and also have an operating temperature range of – 65 degrees F to + 200 degrees F ( – 54 degrees C to + 93 degrees C). Making use of carburized case-hardened Coniflex* bevel gears, all Ever-Power units employ completely enclosed & sealed ball bearings.
The cast aluminum housings upon our 90 level gearboxes are precision machined, on our CNC machining center and coated with a chemical substance film to protect the materials, and use flanged ends and side bosses for compact installation in an array of applications.
The shaft materials used for sizes 1, 2 and 3 is #416 stainless. On the 2 2:1 models, the pinion shaft is certainly carbon steel. For the sizes 4 & 5, the material is dark oxide carbon steel. Shafts can be given special extensions (with flats, splines, holes, etc.) and /or specific lengths upon ask for.
In addition to your standard versions, we will modify our units to meet up your design specifications! Our sales and engineering departments will be ready to help you with your specific application requirements.
Through the years we’ve received questions about nearly every aspect of the gearbox selection process. One of the questions we’ve had several times is, “Exactly what is a right-angle gearbox or a right-angle drive?” Or, more specifically, “How can be a right-angle gearbox or drive not the same as a velocity reducer or other styles of gearboxes?”
gear-speed-reducer-1-2.png
First, let’s focus on some fundamental terminology. It is not uncommon for the terms “gearbox”, “drive” and “quickness reducer” to be utilized interchangeably.
A gearbox is any gadget that runs on the gear teach to transmit torque/rpm and whatever uses a gear to transmit torque/rpm is a gearbox.
A right-angle drive is a system with a gear train that may transmit torque/rpm 90 degrees, to turn a corner
A equipment reducer is a system with a gear teach that may reduce rpm output. A result of decreasing rpm is raising torque at the same ratio velocity is reduced.
A gear box may also be a speed increaser
The kind of gear used in the apparatus box defines it as a right angle or an inline drive.
A worm equipment drive is a right-angle drive since is a bevel gear
A spur gear drive is inline
A helical gear is inline but can also be a right-angle drive
So, exactly what is a right-angle gearbox?
A right-angle gearbox is a gearbox with a right-angle change in direction of the shaft. It can be a 1 to at least one 1 ratio or a multiple of 1 1 such as for example 2:1 or 15:1. If the ratio is 1:1 it really is a right-angle drive. If the ratio is certainly greater than 1:1 it really is a right-angle acceleration reducer.
High torque ball bearing design
Solid one-piece aluminum housing seals gears from outside contaminants for smooth operation
Right- or left-hands rotation to convert power either direction
Quickly slides axially along the drive or driven shaft for flexible positioning
Alloy metal helical gears for high performance
Built in 5 sizes with three types of result shaft : hollow, projecting or double-extended. Moreover, an additional output shaft can be installed reverse to the insight shaft.
Three input types can be found : with projecting input shaft, with pre-manufactured motor coupling (bell and joint) and pre-engineered COMPACT motor coupling.
Gear unit body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to ensure rigidity and machined upon all areas for easy positioning. The single lubrication chamber guarantees improved temperature dissipation and better lubrication of all internal components.
The mechanism of these gearboxes includes two Ever-Power spiral bevel gears with precision lapped profile, 16CrNi4 or 18NiCrM05 manufactured from steel.
The use of high quality bearings on all of the axis ensures long life to the gearbox and allows very high radial and axial loads.
Gearbox housing, flanges, bells and covers are externally painted with BLUE RAL 5010.