Equipped with all the zero leak bidirectional checking sole-noid valves, this power unit is built for that operation of two independent circuits. Which are respectively to the main and subordinate platforms of your double scissors lift. Two cut-off valves are applied for decreasing the machine manually in case of electrical power reduction. If far more independent circuits are needed to your application please get in touch with us for availability.
Remark: 1. Please check with our revenue engineer to the distinct pump displacement, motor energy or tank capacity.
two. CSA or UL licensed motors can be found upon request.
1. The AC motor is of S3 duty cycle, which could only function intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean all of the hydraulic elements concerned ahead of set up of the power unit.
3. Viscosity on the oil shoud be 15~46 cst,plus the oil need to be clean and totally free of impurities,N46 hydraulic oil is advised.
four. The power unit need to be mounted vertically.
5. Check the oil level during the tank after the initial running of the electrical power unit.
six. Oil transforming is required immediately after the first a hundred operation hours,afterwards once just about every 3000 hours.