Material Managing Energy UNIT 2
Standard Description
This electrical power unit functions electrical power up gravity down circuit. Activate the start out solenoid to begin the motor to lift the machine. The lowing motion is activated through the solenoid valve with all the reducing pace controlled through the pressure compensated flow handle valve. Goods of this series might be widely used in the field of logistic units for example fork lift, mini lift table, and so on.
Distinctive Notes
one. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean all of the hydraulic parts concerned prior to mounting the energy unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst,which ought to also be clean and free of charge of impurities, N46 hydraulic oil is advisable .
4. Oil changing is required immediately after the initial one hundred operation hours,afterwards once every single 3000 hrs.
five. The electrical power unit need to be mounted horizontally.

Materials Dealing with Electrical power UNIT 1
Basic Description
This energy unit is intended for that fork lift field, consisting of remarkably efficient gear pump, DC motor, guide raise and lower valve, tank, ect. The up and down motion are managed by the lever with the guide release valve, which is equipped with an electrical switch to activate the motor. The lowing velocity is managed from the strain compensated flow manage valve.
Distinctive Notes
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean all of the hydraulic parts concerned in advance of set up of the power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which should really also be clean and free of charge of impurities, N46 hydraulic oil is suggested .
4. Oil modifying is needed after the preliminary 100 operation hours, afterwards the moment every single 3000 hours.
5. The electrical power unit shown is created to be mounted horizontally.