one.A connecting link of an O-ring Chain for general application is pre-coated with grease at the pins. Prior to connection, confirm the grease on the surfaces of pins, and if the quantity of grease is modest, apply grease with bare hands. (If gloves are used, the grease will be absorbed from the gloves.)
Example: When the connecting link (I) of an O-ring chain for basic application is
shipped, O-rings are fitted at the roots with the pins. If your O-rings come loose as a result of vibration during transport, refit the O-rings in for the roots in the pins.
In this case, make sure you return the grease collected on the roots from the pins towards the central surfaces of the pins, more at portion A than at portions B proven from the over illustration. (Portions A is worn as a result of sliding together with the bushings.)
two.The chain is usually most effortlessly linked around the teeth of a sprocket. Engage the links at each ends in the chain together with the sprocket teeth and match connecting pins. If your sprocket is usually moved, the chain may also be connected within the loosened side.
3. Connecting method
one.Confirm that O-rings are attached to the roots on the pins.
two.In case the level of grease applied around the connecting pins is small, coat the pins with grease on the central portions.
three.Insert the connecting pins in to the bushings on the inner backlinks at each ends.
4.Confirm the grease is applied to the whole encounter on the O-ring, and fit the O-ring onto the connecting pins.
five.Insert the connecting pins in to the connecting plate and while pressing the connecting plate, set up the spring clip. Verify regardless of whether the head (the finish with no split) in the spring clip is turned from the feeding course on the chain. (See the next illustration.)
6.Be sure to verify that the spring clip is securely fitted within the clip grooves on the connecting pins.
This completes jointing from the connecting hyperlink. Note that grease around the surfaces of connecting pins and O-rings could be eliminated for the duration of set up perform. In this instance, re-grease working with the grease around the surface on the base chain or the grease within the polyethylene bag in which the connecting hyperlink was contained.