The EP Greenhouse reducer is a concise and lightweight reduction gear driver with an integrated limit switch system that is ideal for assembly of a locally available electric electric motor. The gear driver is used in manually-controlled or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-install EP gear motor can be rainproof and windproof. The geared motor includes a high protection course (IP65) and can be used in an ambient temperature of 0-60 °C.

The low-noise gearbox for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmission ensures that the drive shaft is usually locked when the decrease geared motor is not running. The fully sealed reduction gearbox comes with an expansion chamber with a diaphragm to keep carefully the gear oil at a minimal pressure under all situations, even at high temps. Thanks to the utilization of an growth chamber, the gear motor can be installed in any placement. There are no limitations, because there is no dependence on a bleed plug. The sealed reduction geared motor keeps the apparatus essential oil of the gear driver in ideal condition for its entire operating lifetime. The gear motor is suitable for discontinuous use, working class s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction gearbox comes with an FT85 motor assembly flange, to which a suitable IEC standard motor can simply be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed in an built-in chamber and can be enclosed by an impact-resistant plastic cover. The limit change system is obtainable and easy to adjust. The limit switch system’s optimum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear driver has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The gear motor for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC regular motor (EN 50347).
Maximum switching selection of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).