| Standard Knowledge | Dimension(mm) | 31.5×36.4×21.2 | |
| Fat ( g ) | sixty | ||
| Get in touch with Arrangement | 1A/1B | ||
| Get in touch with Substance | AgSnO2 | ||
| Ambient Temperature | -forty five~+85ºC | ||
| Vibration | ten~50Hz,.075mm | ||
| Shock | 1000m/s²,(100g) | ||
| Specifications Info | Nominal Voltage | nine~36VDC | |
| Energy Use | <1.5W | ||
| Operating Voltage | 7.2V | ||
| Max. Motor Voltage | 36V | ||
| Max. Switching Recent | 120 A | ||
| Surge Current | 3000A/10ms | ||
| Motor Resistance(R±20%) | 60Ω | ||
| Get in touch with Rating(Res) | 250VAC,120A | ||
| Make contact with Voltage | <60mV | ||
| Speak to Resistance | <0.6mΩ | ||
| Dielectric Strength | Motor to Get in touch with | >4000VAC 1min | |
| Across Open Contact | >2000VAC 1min | ||
| CZPTal Existence | >10000 | ||
| Mechanical Daily life | >100000 | ||
| Pulse Time | 100ms~150ms | ||
| Choosing-up Time | <65ms | ||
| Release Time | <65ms | ||
| Off Speak to Length | ≥0.8mm | ||
| Insulation Resistance | >1000MΩ(500VDC) | ||
Cautions of Latching Relay:
1.Tips of relay’s enter
(one)Polarity-Make sure you examine the polarity inside of of our technological specification, if one coil then”+ -” or “- +”are fantastic,
you can change it by one pulse.If double coil then it’s required to affirm “-+-” or “+-+”ahead of leaving the our factory.
(two)Driving-Make sure you energize the relay at our recommend pulse width, rated voltage for trustworthy overall performance, if one.five
instances or two times of price or reduce driving problem plz confirm with our engineer.
(3)Relays’contact status may be modified throughout transportation or set up because of to influence of exterior pressure,
for that reason remember to reset to the required position.
two.Recommendations of relay’s output
(one)When choosing the relay with challenging relationship,make sure you steer clear of the exterior force on load terminals during or soon after
the set up.
(two)When the relay will be connected with screw or bolts to the relays’ terminals, plz make confident your connection is
fixed and avoid relay from damages or other safety troubles because of to temp. Increase..
(three)The sampling sign wires of goods are constrained, make sure you do not pull or torque during set up.
