We – EPG Team the largest Chain and agricultural gearbox factory in China with 5 various branches. For a lot more information: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
ensures the balance and consistency of the key operate of factors.Common We are hunting ahead to establishing productive organization associations with new consumers around the planet in the future.roller chain is available with pitches from 1/2 to 3 inches. Chain numbers are established by multiplying the pitch by 80 (a 1/2 inch pitch chain would be a No. forty chain). A hyphenated suffix suggests numerous strands. Roller Chain Parts Every single chain is related at the finishes to type a total circle or chain loop by a grasp connecting website link. Cotter plates or spring clips hold the connecting link’s pins from operating unfastened.
INTRODUCTION
Offset Link Chain for Sugar Industry
The offset hyperlink chain is designed with higher abrasion, impact, and corrosion resistance to satisfy the application demands in sugar producing market. Its side plates are bended but with paralleled ends. Equally sizzling bending and chilly bending strategies can be used for facet plate processing. The adoption of advanced bending die, coupled with improved good quality inspection, tends to make sure the bending of aspect plates arrives with out cracks. For that reason, the offset sidebar chain won’t split simply below heavy load situations.
Produced utilizing stainless metal and alloy metal supplies, our offset website link chain for sugar sector provides least tensile power alternatives in between 250 and 900KN, and rated functioning load options from18 to 85KN.
DC 2184 DC 8184 DC C2614 DC 09063 all avaliable
| Chain No. | Pitch P (mm) | Inner width of narrow finish b1 (min.) (mm) | Outer diameter of roller (bushing) D (max.) (mm) | Pin | Sidebar | Min. tensile power Q (min) (KN) | Rated doing work load (KN) | Weight per meter q (kg/m) | |||
| d (mm) | L1 (mm) | L2 (mm) | h (mm) | T (mm) | |||||||
| *#SS100D | a hundred | 33.27 | 33.27 | 17.27 | 38.four | forty eight.6 | forty four.5 | 8 | 200 | 17.8 | ten.47 |
| DC 1125 | one hundred and one.6 | 32.six | fifty.8 | 17.5 | 37.9 | forty five | 50.8 | 7.nine | 210 | eighteen.26 | |
| *DC D2184 | 152.four | 34.9 | seventy six.2 | 22.23 | forty three.nine | fifty one.2 | fifty.8 | nine.5 | 355.6 | 31.six | seventeen.seven |
| DC W1796 | 152.4 | 37.8 | sixty nine.eighty five | 22.23 | forty four.2 | 52.nine | fifty seven.two | nine.5 | 444.five | 31.six | 18.fifty nine |
| DC 09063 | 152.4 | 38 | 76.two | 23.83 | 47.one | fifty four.nine | 60.three | 10.3 | 622.3 | 36.one | 21.83 |
| DC 8184 | 203.two | 45.9 | 88.nine | 25.four | 59.seven | sixty five.eight | sixty nine.9 | twelve.7 | 742.4 | forty seven.6 | 29.two |
| DC C2614 | 304.8 | sixty nine.eighty five | 63.5 | 31.75 | seventy eight.five | eighty four.5 | 88.nine | 15.nine | a thousand | eighty four.five | 33.68 |
The use of first gear manufacturer’s (OEM) part figures or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our firm and the outlined substitute components contained herein are not sponsored, accepted, or produced by the OEM.
