DC motor is a rotating motor that can transform DC electrical vitality into mechanical energy (DC motor) or mechanical power into DC electric powered power (DC generator). It is a motor that can change DC and mechanical energy into a single an additional. When it operates as a motor, it is a direct current motor, which converts electrical strength into mechanical power when it operates as a generator, it is a immediate present generator, which converts mechanical power into electrical energy.
|Product Name||110kw Z4 Series Medium DC Motor|
|Motor Sort||DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
|Composition structure||The composition of DC motor should consist of two elements: stator and rotor. The static part of DC motor is known as stator. The primary operate of stator is to produce magnetic discipline, which is composed of base, primary magnetic pole, commutation pole, stop cap, bearing and brush device. Operating element is known as rotor, whose primary operate is to generate electromagnetic torque and inductive electromotive power. It is the hub of energy conversion of DC motor. So it is also generally referred to as armature, which is made up of rotor, armature main, armature winding, commutator and fan.|
|Torque selection||1.5 ~180kNm|
|Safety stage||IP23, IP44|
|Operating velocity||Constant Pace /Low Speed /Change Pace /Large Speed Other|
|Major classification||DC Motor is a machine that converts mechanical energy into DC energy. It is primarily used as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electrical power provide of alternator. Though in locations the place DC energy is needed, AC power rectifier is also employed to convert AC into DC energy, but from some elements of performance, AC rectifier energy provide can not entirely replace DC generator.|
|Application||DC motors are widely employed in tape recorders, movie recorders, video discs, electric powered shavers, hair dryers, electronic watches, toys and so on.|
|Routine maintenance strategy||Professional motor upkeep heart motor routine maintenance process: cleansing stator and rotor – replacing carbon brush or other elements – vacuum F strain dipping paint – drying – Calibration equilibrium.
1. Use atmosphere ought to be often dry, motor surface must be held cleanse, air intake ought to not be hindered by dust, fibers and other obstructions.
two. When the thermal security of the motor continues to operate, it must be ascertained no matter whether the fault comes from the motor or the overload or the placing worth of the protective device is as well low. Right after eliminating the fault, it can be place into procedure.
3, make certain that the motor is well lubricated in the course of procedure. The common motor operates for about 5000 hours, that is to say, lubricating grease need to be added or replaced. When bearing overheating or lubricating deterioration is located in procedure, the hydraulic strain need to adjust lubricating grease in time. When changing grease, the old grease should be taken off, and the oil groove of bearing and bearing protect must be washed with gasoline. Then ZL-three lithium grease need to be loaded with 1/2 (two poles) and two/three (4 poles, six poles and eight poles) of the cavity in between the inner and outer rings of the bearing.
four. When the lifestyle of the bearing is more than, the vibration and sounds of the motor will enhance obviously. When the radial clearance of the bearing reaches the adhering to worth, the bearing need to be replaced.
5, when eliminating the motor, it is Alright to take away the rotor from the shaft extension or the non extension finish. If it is not essential to unload the fan, it is a lot more hassle-free to just take out the rotor from the non-axle extension finish. When pulling out the rotor from the stator, the stator winding or insulation ought to be prevented from being ruined.
six. When replacing the windings, the form, dimensions, turns and gauges of the unique windings need to be recorded. When these info are dropped, they should be acquired from the manufacturer and the authentic designed windings should be altered at will, which typically deteriorates 1 or many efficiency of the motor or even tends to make it not possible to use them.