Zfour Series DC Motor
Power: 1.4kw – 600KW
Voltage: Standard 160V, 400V, 440V
Pace: Rated Speed reference
Safety Degree: IP21S
Insulation Course: F
Responsibility: S1
Deal: Export Wooden Bundle
Payment: forty% in progress, balance by T/T or L/C at sight
Z4-132-2, 10KW, 400V, 905~1400r/min, IC06, IP21S, F Insulation
CZPT Info
Mounting Proportions
CZPT
1. Mounting and Type of design
Mounting modes comply with the Point out CZPT GB/T997 stipulated as follows:
two. Security and Cooling Approach.
The fundamental cooling method of motor is IC06, It indicates it have a blower for ventilate, also it can be created for IC17, It implies use pipe as the cold air inlet, the air outlet is shutter structure. Also it can be produced for IC37, it signifies the chilly air’s inlet and outlet both use pipe. And it really is have numerous deriving sort, these kinds of as self-ventilation, axial circulation supporter variety, enclosed sort, air-air cooler kind, and so on. The request for the air stream, blast stress, electrical power of the air blower, etc of diverse body motor you should see technical information sheet 1. The safety degree of total sequence Z4 motor reaches IP21S
a. For Z4-one hundred – Z4-160, The blower is mounted on the non-generate side.
b. For Z4-one hundred eighty – Z4-450, The blower is mounted on the travel side.
c. The needed cooling air quantity, air strain and admirer motor ability are demonstrated below:(Table 1)
*All the ventilating supporter motors are 3 period, two pole, 380V.
Motors with the pursuing 5 methods of cooling can also be ordered, but prior consultations are essential.
a. Frame measurement 100 up to 250 might be created into the absolutely enclosed, frame cooled motor(IC410).
b. Frame dimensions a hundred and eighty up to 250 may possibly be manufactured into the separately ventilated motor with blower mounted on its non-generate side(IC05).
c. Frame size a hundred up to two hundred may possibly be created into self-cooled open motor with its possess enthusiast mounted on the shaft(IC01).
d. Frame measurement 160 up to 355 may possibly be made into absolutely enclosed motor with internal cooling air circulation by impartial air-air warmth exchanger mounted on it(IC666).
e. Body measurement a hundred and sixty up to 450 might be produced into entirely enclosed motor with impartial air-drinking water warmth exchanger mounted on it(IC86W).
From the generate stop(Non-commutator placement), The regular terminal box is on the correct placement of the motor frame. For the request by consumer, the terminal box can be created on the opposite place. Also the shaft can be made as double shaft finish. The rotor shaft’s rotation direction is counter clock-wise viewed from the place of commutator. The driving manner is versatile coupling link, also can be use for the driving manner have specific radial drive(this sort of as belt generate or gear travel), It really is allowable radial force should not exceed the benefit of graph.(see hooked up B)
3. Accessories for electric powered motor
In accordance to customer’s request, the motor can be designed to allocate for tacho generator, pulse generator, centrifugal change, arrester brake and so on.
Note: the specification, electrical power and weak-magnet pace variety is only for reference, For the refresh of new technologies, new materials, the information of the catalog will be altered accordingly.
CZPTal functionality
one, complex information must be used in accordance to the subsequent data perform conditions
A. altitude does not exceed 1000m,
B. bordering air temperature is not a lot more than forty ° c,
C. perform environment must not include acid and alkaline or other to touch with insulation impact of gas.
D. motor for ongoing duty (S1),
E. motor armature loop and excitation circuitry by static electricity, rectifying energy provide by dc turbines.
F. the series motor performance with GB/T755 the fundamental technologies of motor.
two, motor 160V rated voltage is regular, 440V. According to the particular conditions can derive 220V and 400V or other voltage.
three, motor rated speed 3,000, 15, ten, 750, 6, five, 4, three, 200r/min of 9.
To decrease the armature voltage continuous torque manage, reduce excitation constant power voltage for speed. Pace selection of technological data table noticed.
In the subsequent with rated voltage regulating pace is consistent torque. It is no considerably less than the minimal speed regulation 20r/min, nevertheless can maintain the rated pace, torque.
four, Separate excitation is the fundamental excitation type of the motors. Nominal field voltage: 180V. Other excitation voltages are also appropriate on ask for.
Forced excitation is permitted with the voltage of considerably less than 500v. When a motor is normally running, its excitation present have to not be higher than the rated excitation existing.
To guarantee the trustworthiness of the insulation of excitation technique, disconnect excitation circuitry on a discipline winding resistance, release ends in parallel to avert self-induction potential. In its benefit regular excitation voltage is about 7 moments the subject winding resistance (chilly point out). While the subject voltage is larger than nominal voltage, the value of shunt resistance could be reduced than seven occasions discipline resistance, normally greater than 7 moments.
5, For frame measurement Z4-315, Z4-355,Z4-400, and Z4-450, compensating windings are offered. For frame size Z4-250 and Z4-280, the motors are feasible with a compensating winding way too.
six, A marked earthing terminal is provided for the motors.
seven, The efficiency listed in the knowledge sheet are for rated output, voltage and velocity , and contain excitation losses, excluding that of independent ventilating supporters.
Order Notice
1. Pls check out our goods catalog and affirm the motor kind and specification prior to location get, and variety selection as feasible as common technical specs shown in catalog. For motor body size, energy, voltage, speed, fascinating approach, interesting voltage and mounting form, should be talked about clear in sales contract. Such as Z4-a hundred and eighty-31, 37KW, 440V, 1000r/min, separated excitation 180v, horizontal mounting with toes or IMB3.
two. Some special specifications this kind of as : double shaft stop, terminal box position are mounting in the reverse way, counter clock-sensible rotation need to be talked about obviously in the agreement.
3. If the consumer require kind, specification are not listing in the catolog, or for other unique requirement, the deal or the pre-generation arrangement ought to be signed soon after equally party’s discussion and arrangement
4. All the motors , Apart from the shaft extension essential, all the accessories are not in the extent of supply, If the components or spare components are requested, this kind of as the brush, brush holder, and so on, pls note the title, specification and portions of the equipment in the agreement.
five. For special surroundings functioning condition, motor would be utilised in humid and scorching areas, pls label TH in the origin variety.
Packaging & Delivery
Tests Equipment
